Electric 12 Volt Power Conversion For Single Speed 12,000 lb. Gooseneck Jacks
This electric motor retrofit kit fits any single speed 12,000 lb. sidewind trailer jack with a 1" shaft diameter.
Actual maximum lifting capacity at jack leg(s) is appx. 4,000 lbs.
Actual lifting capability can vary depending on jack condition, trailer geometry, parking position etc.
This kit was designed by the factory to work on basic 2-3 horse gooseneck trailers with NO living quarters.
No two trailers are the same and manufacturer's Data Plates are notoriously inaccurate.
The best method to determine if this kit will lift your trailer is to check the weight on the jack legs with a scale at a truck stop, rock quarry, feed store, DOT weigh station, etc.
Mounting bracket bolts to front surface of trailers such as gooseneck horse or stock trailers and fifth wheel or gooseneck race car or cargo trailers.
Requires approximately 10" clear space beside jack for mounting.
Comes complete with weather resistant switch and switch box, jack shaft coupler, pins, emergency crank handle and installation instructions.
Cranking Speed at No Load is appx. 16 Revolutions Per Minute.
Jack shown for illustration purpose ONLY. Sold separately.
Wiring and fuse or circuit breaker not included.
OTHER POPULAR PRODUCTS
Copyright © 2000-2020 TowShop LLC All rights reserved.