Torklift Front and Rear Frame Mount Slide in Camper Tiedown Application Charts for Chevrolet and GMC Pickup Trucks.

*Footnotes

1 SuperHitch Magnum 20K/30K requires the use of Tie Down R3504 or Talon Tie Down R3504A

2 Drilling may be required into the Spring Hanger Bracket which is welded to the frame

3 Drilling may be required for Installation

4 May require modifications to the running board / bed access steps brackets to install Tie Downs

5 Additional labor required for installation of Tie Downs

6 Front Tie down is available in adjustable Tie Down style only

7 Fits Classic Body Style only

8 Will also work on vehicles without a hitch receiver

9 The Toyota HD Tow package attaches to the side and bottom of the vehicles frame. The Standard Toyota Tow package attaches to the bottom of the vehicles frame only

10 To determine the correct fit: 1500 & 2500 model / Classic body style vehicle owners must measure the vehicle frame height at the back of the truck next to the spare tire. If the frame is 5.5” tall it requires the LD application, If the frame is 8” tall it requires the HD application

11 Will work with aftermarket hitches that do not have side plates that attach to the bottom of the frame

12 Tie down requires 4”x4” footprint on the side plate of the aftermarket hitch in order to install. Drilling is required for install

13 Works on vehicles without a hitch reciever

14 Dually applications may require the use of (#A7004 Dually Adapter Kit) Measure from front of camper slide in point to the rear anchor point. If total is 90” or less, use Dually Adapter Kit

15 Requires a Factory installed hitch reciever with an open ended cross tube

16 Designed to work with the factory installed running board / bed access steps that extends past the cab and onto the bed, Tie Down is not adjustable in height

17 SuperHitch Magnum 20K/30K D1102M requires R3503/ R3503A rear tie downs SuperHitch Magnum 20K D1101M requires R3503/R3503A Rear TD

18 Toyota Tacoma’s with a 5’ bed & running boards / bed access steps under the cab will need to remove the running boards / bed access steps to install this tie down

19 This Tie Down is used with the SuperHitch Hero

20 Will not work with aftermarket Mopar rear mounted kick out steps that are mounted under the bumper

21 This SuperHitch Original 17K/20K Tie Down is also used with SuperHitch Magnum 20K/30K

 22 This Tie Down mounts to the cab mount, you will need to remove the running boards / bed access steps to install this tie down

23 Using older one piece SuperHitch, for rear tie down, please call 800.246.8132

24 Use #C3201 for rear Tie Down when used with C1202 SuperHitch

25 There are no factory hitch options available for this vehicle. Hitches installed on this truck were dealer installed aftermarket hitches. Please search for your rear tie downs under the AfterMarket column

26 Designed to be used with the OEM cross tube that comes installed on the vehicle without a hitch receiver from the factory

27 Will not work with Hidden Power due to Tie Down design

28 Works with NO running boards / bed access steps, including the ones that are just under the cab. If you have running boards / bed access steps under your cab, you will need front tie down D2127

29 Works with any factory running boards / bed access steps, including the ones that are just under the cab

30 Due to compressor location this Tie Down can’t be installed with factory airbags

TowShop LLC
PO Box 313
Eagle Creek, Oregon  97022
503-637-5050

Copyright © 2000-2018  TowShop LLC All rights reserved